OPPO is preparing its Reno7 series. Contrary to previous predictions, OPPO will not bring a Reno7 Pro+ model, but you can see the low-end Reno7
SE, and makes Reno7 Pro continue to be at the top of its series.Reports from Spain indicate that the standard version of Reno7 and Reno7
Pro shares a large part of the hardware: a 6.5-inch OLED panel is used together, but the difference lies in the refresh rate, the standard version is 90Hz and the Pro version has 120Hz, the same 4500 mAh battery and 65W fast charging.
The camera is naturally the biggest factor in distinguishing models: standard versionOPPOReno7 is equipped with a 50-megapixel Sony IMX766 main image sensor, with a 16-megapixel wide-angle sensor and a 2-megapixel depth sensor unit. And the Pro version will take advantage ofSamsungA 50-megapixel GN5 sensor, OmniVision’s 64-megapixel OV64B wide-angle and a 13-megapixel telephoto sensor.
There are also big differences in processors. The Reno7 uses MediaTek Dimensity 1200 SoC, while the Pro model will have a built-in Snapdragon 888, with 8GB or 12GB of memory, plus up to 256GB of internal storage.
Finally, the Reno7 SE at the bottom end is expected to bring a smaller 6.43-inch 90Hz display, MediaTek Dimensity 920 chip and a 12GB/256GB single memory/storage combination. Just like the two models introduced before, the front of the fuselage will contain a 32-megapixel selfie camera, while the main camera will be a 64-megapixel OmniVision OV64B and an 8-megapixel Sony IMX355 wide-angle and a portrait camera. The 2 million pixel depth sensor has a smaller 4300 mAh battery built into the body but the same 65W fast charge.
As of now, we have no official information on the release date of the OPPO Reno7 series, but the report indicates that the series should be on sale sometime in November. The above information seems to be basically consistent with the previous leaked information in mid-October.